Vacuum pressure pump is a device that removes gas molecules from a sealed volume in order to keep behind a partial vacuum. The 1st vacuum pump was invented in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover a wide variety of operating pressures. Laboratory/filtration vacuum pumps are for use in the laboratory or anywhere a low vacuum is needed; typically present both vacuum and pressure features. Use rough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring an even of vacuum less than 10-3 Torr. Use high vacuum pressure pumps when you need vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the higher the free air capability, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dry or oilless) pump. Lubricated pumps offer higher capacities, higher vacuum amounts, and lower noise, but can contaminate the machine and require even more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of commercial vacuum pumps includes oil-less and oil-flooded choices. We are able to customize a pump to suit your specific needs and offer you with guidance when it comes to selecting the most appropriate pump for you. You may expect high-quality, long-lasting results when you choose Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps made to operate on a continuous basis at any point from atmospheric pressure to vacuum pressure degree of 27” HgV (75 torr). These direct travel units are supplied with a higher efficiency TEFC, C-face, flange mounted electric motor. Each one of these pumps has an integral vacuum alleviation valve, a 5μ inlet filter, and vibration isolators as standard equipment.