worm gear speed reducer
Solitary reduction worm gearing provides high ratio reduction with few moving parts in a close-coupled compact drive. The proper angle arrangement of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient engine speeds are reduced to slower speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive use of the involute Helicoid Thread form (with leaving side contact) on the worm and gear provides for high efficiencies, and lengthy service life. The hardened floor and polished alloy metal worm develops a clean, work hardened surface area on the bronze gear. For this reason worm gears put on in and improve with prolonged service while additional gears are wearing out. Ever-Power offers a wide collection of model configurations, sizes, ratios, and add-ons from our standard product line.
Fabricated Designs
If your application involves serious shock loads or feasible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength which allows the transmission of higher horsepower amounts than are possible with standard cast iron devices. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring proper meshing of the gear under all load conditions. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom velocity and reversed engineered reducers for your application, be it a new project or a direct drop-in replacement for a competitor’s rate reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also includes a hardened, floor and polished alloy metal worm. This combination develops a soft, work-hardened mating surface of the bronze gear which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides simple and quiet procedure and permits the likelihood of large velocity reductions. These gears are available from share in a wide selection of ratios, from only 4:1 to as much as 3600:1. The compact design and building allows worm equipment reducers to be positioned in a comparatively small space. Thus, very high reductions in a limited package size may be accomplished with this configuration. Our worm equipment features the constant sliding tooth actions between worm and the teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with some other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series foundation on years of experiences uses designed teeth surface area with unsurpassed torque transfer overall performance with great performance, efficency and price.Worm gear program transmits power through sliding contact, leading to extremely low vibration , sound, little backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and inner lubrication essential oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one type of reduction gear package which consists of a worm pinion input, an output worm equipment, and includes a right angle result orientation. This type of reduction gear container is normally used to take a rated motor acceleration and produce a low speed output with higher torque value based on the reduction ratio. They often can resolve space-saving problems because the worm gear reducer is one of the sleekest reduction gearboxes available due to the little diameter of its output gear.
worm gear reducerWorm equipment reducers are also a favorite type of rate reducer because they offer the greatest speed reduction in the tiniest package. With a higher ratio of speed decrease and high torque result multiplier, it’s unsurprising that lots of power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical tests equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm equipment reducer, the SW-1 and the SW-5 and both can be found in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with durable compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a solid or hollow result shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading better than other decrease gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also called worm gearbox or worm quickness reducers. Worm equipment reducers are used for speed reduction and increasing the torque for electric powered engine drives. You can choose to mount your NEMA engine to the reducer utilizing the NEMA C encounter flange or use a coupling. If you need a coupling for the output or input shaft find our coupling section for choosing the coupling. We offer four assemblies left hand and right hands and double output shaft and shaft input and shaft result. Interchangeable with the majority of worm gear manufactures. Find data sheet in product overview for diamensions. If you don’t see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear swiftness reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are ideal for water/waste-water equipment drive applications such as thickeners and clarifiers, which need a vertical down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or components handling systems where large torques/sluggish speeds are needed.
These reducers are also obtainable with a helical primary reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow acceleration, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm gear reducers are used in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual result shafts or a hollow bore output. The indirect drive models are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They offer an effective low cost solution to speed reduction and improved torque, with higher tolerances for shock loading than helical equipment reducers.
In order to select a gearbox speed reducer, you will need to determine the mandatory torque and provider factor for the application form. Click on “Specs” above for a table that will assist in determining the service factor. For service elements above 1.0, multiply the required torque by the support factor.
Our regular 700 Series – the heart of Ever-Power speed reducer product line – has been serving industry reliably for over 40 years. Its confirmed modular design has set the industry standard for performance and may be the most imitated product in the current worm gear acceleration reducer market. But why settle for a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is constructed of close-grained cast iron and provides for rigid gear and bearing support. In addition, it offers excellent high temperature dissipation.Dual lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for ease of maintenance (unavailable upon sizes 25 and 34).Factory oil stuffed.Every device test run prior to shipment.Universal installation with bolt-on feet.Highly modifiable design.All this at substantially reduce prices than you have already been accustomed to paying for reducers of lesser quality. Less